Home | Knife Valves | Butterfly Valves | Check Valves | Expansion Joints | Y Type Strainers | Contact Us

 

Knife Gate Valves

Knife Valves Home

 

Buy On Line

 

Handwheel Rising

Handwheel Non Rising

Air (Pneumatic)

Electric

Lever

Chainwheel

Accessories

Materials

ATEX

Tecofi » Knife Valves » Air Operated - DN 50 to DN 1200


These are now available to buy on line.
Click Here to access our shop


Air operated Knife Valves are used in any situation where a low cost, reliable actuated valve is required.  Whether you need a valve firing open and closed all day or a simple remote actuation solution these are hard to beat.

The linear movement of the gate of a Knife Gate Valve makes it very easy to actuate with a simple pneumatic cylinder (sometimes called a pneumatic ram).  Apply air to one cylinder port and the valve opens, apply it to the other and it closes - Simple.  Even easier if you take it pre-fitted with a solenoid valve.

All VG Pneumatic Knife Gate Valves are fitted with a cylinder sized, designed and built specifically for the VG valve - no separate adaption plates, no separate clevis.  The base of the cylinder is a single aluminium casting bolted directly to the valve support plates, the piston rod is stainless.

Every valve is pre-drilled and tapped for Guards, End of Travel Switches and Solenoid Valve.  This is true even for manually operated valves so converting from manual to pneumatic couldn't be easier.

Our air operated Knife Gate range is available ATEX Certified for explosive atmospheres. For more information please visit our ATEX page: ATEX

Unlike some manufacturers, all VG Pneumatic Slide Valves are supplied fitted with Stainless protection guards.

 

Ductile Iron valve has epoxy coated body

Ductile Iron Plate Valve Air Stainless Plate Valve Air

Stainless valve has self colour body

The whole range of seat materials and accessories suits both Ductile Iron bodied and Stainless bodied Pneumatically Operated Plate Valves.

 

Pneumatic Knife Valve Sizes

The VG Air operated Slide Valves are available in the following sizes in both Ductile Iron Body and Stainless Body:
DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300, DN 350, DN 400, DN 450, DN 500, DN 600, DN 700, DN 800, DN 900, DN 1000, DN 1200.
Or, in Imperial: 
2 inch, 2 1/2 Inch, 3 Inch, 4 Inch, 5 Inch, 6 Inch, 8 Inch, 10 Inch, 12 Inch, 14 Inch, 16 Inch, 18 Inch, 20 Inch, 24 Inch, 28 Inch, 32 Inch, 36 Inch, 40 Inch, 48 Inch.

 

Download datasheets here

Ductile Iron Knife Gate Valve Pneumatic
Stainless Knife Gate Valve Pneumatic

 

Need more information?

Email us here
Or go to our Contact Page

Pneumatic knife valves from a UK slide valve expert.

Home | Knife Valves | Butterfly Valves | Check Valves | Expansion Joints | Y Type Strainers | Contact Us

Copyright © 2024 S & P Spanarc Ltd